Ubiquiti PowerBeam M5 5GHz ISO
SKU:
UBI-PBE-M5-300-ISO
DKK824.00
DKK824.00
pr. vare
PBE-M5-300-ISO System and Regulatory/Compliance
https://dl.ubnt.com/datasheets/PowerBeam_ISO/PowerBeam_ISO_DS.pdf
he PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. The big advantage of this housing is its easy installation (one bolt).
Ubiquiti???s InnerFeed??? technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost???effective to deploy.
Processor Specs Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2, 8 MB Flash
Networking Interface (1) 10/100 Ethernet Port
Wireless Approvals FCC, IC, CE
RoHS Compliance Yes
PBE-M5-300-ISO Physical/Electrical/Environmental
Dimensions 364 x 364 x 276 mm (14.33 x 14.33 x 10.87)
Weight 2.55 kg (5.62 lb)
Power Supply 24V, 0.5A PoE
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range 20-26VDC
Max. Power Consumption 6W
Gain 22 dBi
Operating Frequency
Worldwide
USA
5170 - 5875 MHz
5725 - 5850 MHz
Wind Loading 210 N @ 200 km/h (47 lbf @ 125 mph)
Wind Survivability 200 km/h (125 mph)
LEDs (1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes 5/8/10/20/30/40 MHz
Polarization Dual Linear
Enclosure Outdoor UV Stabilized Plastic
Mounting Pole-Mount Kit Included
ESD/EMP Protection Air: ?? 24 kV, Contact: ?? 24 kV
Operating Temperature -40 to 70?? C (-40 to 158?? F)
Operating Humidity 5 to 95% Non-Condensing
Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test IEC 68-2-6
Temperature Shock Test IEC 68-2-14
UV Test IEC 68-2-5 at 40?? C (104?? F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
https://dl.ubnt.com/datasheets/PowerBeam_ISO/PowerBeam_ISO_DS.pdf
he PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity and RF isolation, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency. The big advantage of this housing is its easy installation (one bolt).
Ubiquiti???s InnerFeed??? technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses.
Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is extremely versatile and cost???effective to deploy.
Processor Specs Atheros MIPS 74Kc, 560 MHz
Memory 64 MB DDR2, 8 MB Flash
Networking Interface (1) 10/100 Ethernet Port
Wireless Approvals FCC, IC, CE
RoHS Compliance Yes
PBE-M5-300-ISO Physical/Electrical/Environmental
Dimensions 364 x 364 x 276 mm (14.33 x 14.33 x 10.87)
Weight 2.55 kg (5.62 lb)
Power Supply 24V, 0.5A PoE
Power Method Passive PoE (Pairs 4, 5+; 7, 8 Return)
Supported Voltage Range 20-26VDC
Max. Power Consumption 6W
Gain 22 dBi
Operating Frequency
Worldwide
USA
5170 - 5875 MHz
5725 - 5850 MHz
Wind Loading 210 N @ 200 km/h (47 lbf @ 125 mph)
Wind Survivability 200 km/h (125 mph)
LEDs (1) Power, (1) LAN, (4) WLAN
Signal Strength LEDs Software-Adjustable to Correspond to Custom RSSI Levels
Channel Sizes 5/8/10/20/30/40 MHz
Polarization Dual Linear
Enclosure Outdoor UV Stabilized Plastic
Mounting Pole-Mount Kit Included
ESD/EMP Protection Air: ?? 24 kV, Contact: ?? 24 kV
Operating Temperature -40 to 70?? C (-40 to 158?? F)
Operating Humidity 5 to 95% Non-Condensing
Salt Fog Test IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5
Vibration Test IEC 68-2-6
Temperature Shock Test IEC 68-2-14
UV Test IEC 68-2-5 at 40?? C (104?? F), Equivalent: ETS 300 019-1-4
Wind-Driven Rain Test ETS 300 019-1-4, Equivalent: MIL-STD-810 G Method 506.5
Udsolgt